Skip to content 
About 45 kilometres north of Melbourne’s CBD, at the foot of the Great Dividing Range, Wallan has gone from a country town to one of the fastest-growing communities on Melbourne’s northern edge. New estates such as Wallara Waters are bringing thousands of new homes, and the population is forecast to more than double over the next two decades. If you’re building, buying new or picking up an older home in the original township, building inspections in Wallan are the best way to know exactly what you’re getting.
Authority Building Inspections travels to Wallan 3756 for construction stage inspections, practical completion (PCI) inspections, pre-purchase building inspections and building and pest inspections.
Building in Wallan’s new estates
Most new homes in Wallan are house-and-land packages from volume builders. Building at this scale and speed means defects slip through. Your builder’s surveyor checks minimum compliance, but an independent inspector works only for you. Across new builds in Melbourne’s outer north, we commonly find:
- Site and slab issues on sloping or rocky blocks, including cut-and-fill problems, poor drainage, and ground levels left too high against the slab
- Frame defects, such as missing bracing and tie-downs, damaged or overcut members, and poorly installed windows
- Wet area waterproofing that’s incomplete or damaged before tiling
- Roofing and flashing problems, which matter more in Wallan’s cooler, wetter and windier conditions than in inner Melbourne
- Handover defects such as poor paint and plaster finishes, cracked tiles, misaligned doors and incomplete external works
Our stage inspections at slab, frame, lock-up and fixing stages, followed by a PCI inspection, give you a photo-backed defect list before each progress payment and before you accept the keys.
Buying an existing home in Wallan
Older homes in the original township
Wallan’s established streets near the town centre and station include older weatherboard and brick homes. We check stumps and subfloors, roof condition, timber decay, wet areas and any additions, plus materials that may contain asbestos in homes built before 1990.
Near-new estate homes
Homes from the last 10 to 15 years can already show shower leaks, brick cracking, drainage problems and termite risk where landscaping covers the slab edge. A pre-purchase inspection helps you spot these issues, and identify any that may still be the builder’s responsibility.
Rural and lifestyle properties
Larger properties around Wallan often include sheds, outbuildings and rainwater tanks, and some are in bushfire-prone areas. Let us know what’s on the property when you book, and we’ll tell you what our inspection covers and when you might need another specialist.
Why Wallan home owners choose Authority
- Fully independent: we work for you, not your builder
- Registered Master Inspector with more than 20 years in building and construction
- Reports guaranteed within 4 hours, with clear photos you can forward to your builder
- Free thermal imaging and moisture testing
- We coordinate access with your builder’s site supervisor or the agent
We also cover the northern growth corridor, including Beveridge, Kalkallo, Donnybrook, Mickleham and Craigieburn.
Wallan building inspection FAQs
Do you travel to Wallan?
Yes. Wallan is a regular part of our service area, and we can often inspect within a day or two of booking.
Which construction stages should I inspect?
If you can only choose a few, frame stage and practical completion are the most valuable. For full protection, inspect at slab, frame, lock-up, fixing and PCI.
Can I inspect a home I’m buying off the plan?
Yes. We can inspect at key stages during construction where your contract allows access, and before settlement once the home is finished.
Book a building inspection in Wallan
Call 1800 75 25 85 or request a free quote online. Tell us the address, the type of inspection and when you need the report, and we’ll confirm a time, usually the same or next day. Inspections are carried out by a Registered Master Inspector with 20+ years in the building industry, thermal imaging is included free, and you can call your inspector after reading the report to talk through anything that’s unclear.